About: DS18 BRO-BASS Ford Bronco 6th Gen Tailgate 12" Subwoofer Enclosure with IXS12.4D
Bring the Boom to your Bronco with DS18’s BRO-BASS!
The BRO-BASS comes with DS18’s IXS12.4D: a shallow subwoofer made for ported boxes and guaranteed to output heavy bass every session! The BRO-BASS was designed to maximize bass response and output without requiring a lot of rear cargo space – the IXS12.4D’s minimized mounting depth (4.33”) makes it the perfect speaker for this enclosure. These speakers reproduce frequencies as low as 30 Hz and play insanely well in this ported enclosure tuned to 45 Hz.
If you enjoy riding trails with the top down, your speaker is protected! The IPX1 Water Resistance Material used in the BRO-BASS protect it from light rain or moisture damage! However, this does not mean the BRO-BASS is WATERPROOF!
Elevate the aesthetics of your Bronco's tailgate with the exclusive DS18 design featuring an eye-catching RGB LED grille. As the sun sets and the darkness settles in, let your music take center stage as the RGB LED lighting illuminates your subwoofer with mesmerizing colors, creating a sensory experience like no other.
The power of the BRO-BASS is truly awe-inspiring. With a total RMS power handling of 800W and a MAX power handling of 1600W, this subwoofer is ready to unleash the full potential of your car audio system. The sensitivity of 90dB ensures that every note is reproduced with remarkable clarity, while the frequency response of 30Hz to 200Hz guarantees a wide range of deep and impactful bass.
This easy to install ported subwoofer enclosure fits perfectly over the rear paneling in 6th Generation Ford Bronco Tailgates! The detailed instructions in the manual will ensure a seamless installation.
Amplifier Required!
Product Highlights
- Loaded Subwoofer Enclosure
- 6th Gen Bronco
- 1 X 12" IXS12.4D
- LED RGB Lights
- Water Resistant Housing
- Installation Hardware Included
Specifications:
- SKU: BRO-BASS
- Speaker Size: 12" / 304mm
- Total Impedance: 2 Ohms
- Total RMS Power Handling: 800W
- Total MAX Power Handling: 1600W
- Sensitivity (1w/1m): 90dB
- Frequency Response: 30Hz-200Hz
- Recommended Lo Pass Crossover: 80Hz
Features
- Ported Box for High Output: Yes
- Water Resistant Materials for Light Rain: Yes (IP11)
- Exclusive Ford Bronco Design: Yes
- Injected Molded ABS Grill with Built-in RGB LED lighting: Yes
- Input Wires for RGB LED and Subwoofer: Yes, 5ft / 1.5m (6 Cores)
- Subwoofer Included: Yes, 12" (IXS12.4D)
- Installation Hardware Included: Yes, 3 x 6M screws / 3 x 6M rivet nut
- Easy to Install: Yes, fits on the tailgate and secures using the factory bolt location
Speaker Specifications
- Voice Coil Diameter: 2.5" / 63.5mm
- Voice Coil Former Material: Aluminum
- Winding Material: Copper
- Cone Material: Paper
- Dust Cap Material: Fiberglass
- Surround Material:Stitched rubber
- Basket Material: Aluminum
- Magnet Material: Ferrite
- Magnet Weight: 62 Oz
Box Specifications:
- Internal Volume: 34L / 1.2ft3
- Port Tune Fb: 45Hz
- Load Configuration: Parallel
- Box Type:Front Loaded Ported
- Box Material: Polyethylene (PE)
- Finish Material: Black
- -3Db Dropping Point F3: 36Hz
Measurements
- Overall Height: 17.81" / 452.3mm
- Overall Width: 27.4" / 695.6mm
- Overall Depth: 7.4" / 188mm