About: DS18 PRO-HY6.2MSL 6.5" 150W RMS Slim Hybrid Mid Range Loudspeaker with 1" Compression Driver Horn - 2 Ohm (Each)
DS18’s PRO-HY6.2MSL is made for tight builds that need BIG sound. With a hybrid design that pushes full-range clarity in a slim profile, this 2-ohm loudspeaker is the perfect solution for motorcycles, UTVs, Slingshots, Jeeps, and other powersports vehicles.
Hybrid Power
This compact beast combines a 6.5” midrange woofer with a built-in 1” compression driver horn—giving you the full range of frequencies in one clean unit. It hits 150W RMS / 300W MAX, with 97dB sensitivity and a wide 120Hz–20KHz response, delivering loud, accurate audio where it matters most.
Built to Ride
The PRO-HY6.2MSL features a paper cone, cloth surround, and a black steel basket backed by a 19.5oz ferrite magnet. The compression driver brings the heat with a titanium diaphragm, Kapton voice coil, and neodymium magnet.
Fits Tight
At just 2.82” mounting depth and a slim 6.55” total diameter, the PRO-HY6.2MSL mounts just about anywhere your setup needs some punch. Offering a clean fit and getting louder than anything else in its class.
Product Highlights:
- 6.5" Shallow Hybrid Coaxial Mid-Range w/Driver
- RMS Power: 150 Watts(300 Watts Peak)
- Impedance: 2 Ohm ~ 97dB
- Ferrite & Neodymium Magnets
- With Grill
- Easily Repaired With The PRO-HY/VC
Specifications:
- SKU: PRO-HY6.2MSL
- Nominal Diameter: 6.5" (165.1 mm)
- Nominal Impedance: 2 Ohms
- RMS Power Handling: 150W
- MAX Power Handling: 300W
- Sensitivity (1w/1m): 97dB
- Frequency Response: 120Hz-20Khz
- Recommended HI Pass Crossover: 140Hz
- Number of Ways: 2 ways
- Pair or Single: Single
- Grill Included: Yes
Woofer Specifications:
- Voice Coil Diameter: 1.5" (38.6 mm)
- Voice Coil Former Material: KSV
- Winding Material: CCAW
- Cone Material: Paper
- Surround Material: Cloth
- Basket Material: Steel
- Basket Color/Finish: Black
- Magnet Material: Ferrite
- Magnet Weight: 19.5 Oz
Thiele & Small Parameters
- Equivalent Volume (Vas): 7L / 0.248ft3
- Excursion (one way) (Xmax): 1.5mm
- Free Air Resonance (Fs): 163Hz
- Mechanical Factor (Qms): 7.488
- Electrical Factor (Qes): 1.102
- Total Factor (Qts): 0.96
- Mechanical Mass (Mms): 2.87g
- Mechanical Compliance (Cms): 0.333mm/N
- BL Factor (BL): 2.287
- Voice Coil Inductance (Le): 0.07041mH
- Cone Area (Sd): 136.8 Cm2
- DC Resistance (Re): 1.9 ohm
- Mechanical Mass w/o air (Mmd): 20.7g
Driver Specifications:
- Voice Coil Diameter: 1" (25.4 mm)
- Voice Coil Former Material: Kapton
- Winding Material: CCAW
- Diaphragm Material: Titanium
- Magnet Material: Neodymium
- Horn Diameter: 3.15" (80 mm)
Measurements:
- Overall Diameter (Without Grill): 6.55" (167 mm)
- Overall Diameter (With Grill): 6.93" (176 mm)
- Overall Depth (Without Grill): 3.26" (83 mm)
- Overall Depth (With Grill): 3.45" (88 mm)
- Front Mount Baffle Cutout: 5.65" (144 mm)
- Mounting Depth: 2.82" (72 mm)
- Motor Diameter: 4.31" (110 mm)