Descriptions

About: Kenwood Excelon X803-5 5-Channel Car Amplifier — 50W RMS x 4 + 500W RMS x 1

Rich and Immersive High-Resolution Audio

High-Resolution Audio is high-quality sound that exceeds CD standard. High-resolution audio captures and beautifully expresses all the details of your favorite music. Through ultra-high and low frequencies, immerse yourself in a rich and high-quality sonic experience.

Output Coil with Magnetic Shield

Prevents magnetic flux from radiating from the subwoofer's coil, resulting in reduced noise and enhanced sound quality.

High Quality Capacitors

PMLCAP's (Polymer Multi-Layer Capacitors) are utilized in the LC filter circuits to decrease distortion, ensuring clear detail for a truer to life sound.

One-side Connection

All terminals and connections are on one side for easier installation and a cleaner look.

Speaker Level Input Harness

Speaker Level Input Harness is included to connect to speaker wires from factory installed receivers.

Wired Level Control Included

The wired remote level control allows you to easily adjust the subwoofer volume.

Product Highlights:

• Max Power: 1600W
• RMS Power:  75W x4 (4Ω)
• RMS Power: 50W x4 + 300W (4Ω)
• RMS Power: 75W x4 + 500W (2Ω)
• Size (W x H x D): 9-3/4" x 2-1/16" x 6-5/8"
• High-Resolution Audio Certified
• Variable Low Pass Filter
• Bass Boost
• Wired Remote Included

Specifications: 

• 5-channel car amplifier
• 50 watts RMS x 4 + 300 watts x 1 at 4 ohms
• 75 watts RMS x 4 + 500 watts RMS x 1 at 2 ohms
• 150 watts RMS x 2 bridged at 4 ohms + 500 watts RMS x 1 at 2 ohms
• CTA-2006 compliant
• Class D amp technology
• Frequency response: 20-50,000 Hz
• Hi-Res Audio certified
• Variable high-pass filters on A and B channels: 50-200 Hz, 12 dB/octave
• Variable low-pass filter on sub channel: 50-200 Hz, 24 dB/octave
• Variable bass boost on sub channel: 0-18 dB at 40 Hz
• Wired remote control for sub channel included
• Preamp and speaker-level inputs
• Speaker wire adapters included
• Speaker-level inputs can handle up to 12V (36W)
• Signal-sensing turn-on with speaker-level input
• Wiring and hardware not included with amplifier
• 4-gauge power and ground leads recommended
• Fuse rating: 30A x 3
• Dimensions (W x H x D): 9-3/4" x 2-1/16" x 6-5/8"

What's in the Box:

• 5-Channel amplifier (three installed 30A mini-ATC fuses)
• 7" Speaker-level input harness
• Remote level control
• 19.5' Remote level control cable (RJ-14 connectors on both ends)
• Hex nut
• Flat washer
• Four 1/2" screws
• Two Allen keys (4mm & 2.5mm)
• Instruction manual (En/ Sp/ Fr)
• Warranty information