Descriptions

About: PAC Audio C2R-FRD1 Radio Replacement Interface for Select Ford Vehicles 

Provides navigation trigger wires and timed accessory output for replacing the factory radio. Retains the factory-installed amplified audio system and rear-seat entertainment (if equipped). Use a steering wheel interface module to retain the function of all factory controls.

The C2R-FRD1 is an essential installation accessory for select 2005+ Ford/Lincoln/Mercury vehicles with MSCAN databus radios. Using this interface will enable factory features as rear seat entertainment (RSE), rear seat controls (RSC), and THXII amplifier when the original radio is removed. Other features  of the C2R-FRD1 include data bus driven retained accessory power (RAP), vehicle speed sensor (VSS) output, illumination, reverse output, parking brake output and a 5 volt regulated amp turn on for factory installed subwoofers.

Specifications:

• Radio Replacement Interface for Select 2005-up MSCAN-bus Ford, Lincoln and Mercury Vehicles
• Enables factory features such as rear seat entertainment, rear controls, and the THXII amp when the factory radio is replaced
• Provides RAP accessory power output, vehicle speed, illumination, reverse indication output and parking brake output signal to allow easy installation of an aftermarket NAV system
• Radio Replacement Interface for Select 2005-up MSCAN-bus Ford, Lincoln and Mercury Vehicles
• Enables factory features such as rear seat entertainment, rear controls, and the THXII amplifier when the factory radio is replaced
• Also provides RAP accessory power output, vehicle speed, illumination, reverse indication output and parking brake ouput signal to allow easy installation of an aftermarket NAV system
• Compatible with THX, SONY, Shaker and Audiophile sound systems in applicable vehicles. (v1.1.4 or higher required)

Vehicle Applications: 

Ford

• Edge (Without steering wheel controls): 2007 - 2010
• Escape (Without steering wheel controls): 2008 - 2012
• Expedition (Without steering wheel controls): 2007 - 2014
• Explorer (Without steering wheel controls): 2006 - 2010
• Explorer sport trac (Without steering wheel controls): 2007 - 2010
• F-150 (Without steering wheel controls): 2009 - 2012
• F-250 (All other trim levels, Without steering wheel controls): 2008 - 2012
• F-350 (All other trim levels, Without steering wheel controls): 2008 - 2012
• F-450 (All other trim levels, Without steering wheel controls): 2008 - 2012
• Five hundred (Without steering wheel controls): 2005 - 2007
• Flex (Without steering wheel controls): 2009 - 2012
• Focus (Without steering wheel controls): 2008 - 2011
• Freestyle (Without steering wheel controls): 2006 - 2007
• Fusion (Without steering wheel controls): 2006 - 2012
• Mustang (Without steering wheel controls): 2005 - 2013
• Taurus (Without steering wheel controls): 2008 - 2012
• Taurus x (Without steering wheel controls): 2008 - 2009

Lincoln

• MKS (Without steering wheel controls): 2009 - 2012
• MKT (Without steering wheel controls): 2010 - 2012
• MKX (Without steering wheel controls): 2007 - 2010
• MKZ (Without steering wheel controls): 2007 - 2012
• Navigator (Without steering wheel controls): 2007 - 2014
• Zephyr (Without steering wheel controls): 2006

Mazda

• Tribute (Without steering wheel controls): 2008 - 2011
• Mariner (Without steering wheel controls): 2008 - 2011
• Milan (Without steering wheel controls): 2006 - 2011
• Montego (Without steering wheel controls): 2005 - 2007
• Mountaineer (Without steering wheel controls): 2006 - 2010
• Sable (Without steering wheel controls): 2008 - 2009 

Note: 2008 - 2010 F-250/350/450 not compatible with model trim XL (fleet vehicles). These vehicles do not have the necessary CAN bus signals 

What's in the Box:  

• Ford radio replacement interface
• OEM to interface adapter harness
• Installation Instructions