About: PAC BCI-CH41 Backup Camera and Navigation Unlock Interface for Select Chrysler, Dodge, Jeep and Ram Vehicles 

Completely revamped, the BCI-CH41 is a multi-functional interface module for select Dodge/Jeep/Ram/Chrysler vehicles that configures the factory radio to accept the addition of a reverse*, blind spot elimination (left/right side), and front camera inputs for added safety and convenience. It also lets passengers freely use the built-in navigation system and other radio features while the vehicle is in motion. An audio/video media input* for passenger entertainment, the ability to swap/reprogram the vehicle’s steering wheel controls, and three programmable 12-Volt outputs for powering cameras or other devices are included. Lastly, innovative convenience features such as retaining last memory settings for vehicle models with Start-Stop, Eco-mode, Sport-mode, and Remote Start Climate Control are provided.

Features:

• Reverse camera input and navigation unlock interface
• Compatible with select 2013-2019 vehicles from Ram, Dodge, Jeep
• Programs the factory radio to allow the addition of a reverse camera or rear media input
• Allows the following factory navigation features in your factory radio:
• Blind spot camera
• Front camera
• Eco mode memory
• Auto start/stop memory
• Sport mode memory
• Remote start climate restore
• Steering Wheel Control (SWC) swap
• Equalizer presets
• Programmable 12V outputs to reverse camera, AV switcher, or a generic accessory outputs
• On-demand activation of rear or front camera
• An external A/V switcher must be used in order to use more than one video source with the BCI-CH41

Specifications:

• 2018 + Applications require rev. 14 firmware or higher
• 2019 RAM Truck must be "Classic" body style
• Chrysler 200 & Jeep Cherokee: These vehicles do not support the addition of reverse camera or Rear Media Mode.
• 2017+ Chrysler 300, Dodge Charger and Challenger: These vehicles do not currently support the addition of Rear Media Mode
• 2018+Durango, Grand Cherokee, and RAM Trucks: These vehicles do not currently support the addition of Rear Media Mode
• Vehicles equipped with the 5" screen do not support the addition of Rear Media Mode 
• RAM trucks equipped with a manual transmission will not support the Forced Reverse Camera or Reverse Output Trigger features.
• If navigation is being used and the camera input is engaged UNDER 20 MPH, it will affect the navigation guidance until the camera input is switched off.
• If you are adding a secondary reverse camera to a vehicle with a factory reverse camera, you must also use an AVS21.
• RAM trucks equipped with a factory bed camera and reverse camera on the radio screen: If you want to add Rear Media Mode to this vehicle, you must use an AVS21 to retain the factory bed cam, as this input will now be used by the new video input. Please see the tech brief describing this process under the "Downloads" tab.
• RAM trucks equipped with reverse camera in the mirror: You cannot use the BCI-CH41 to program the radio screen to accept a reverse camera, blind spot cameras, or a front camera
• Vehicles equipped with an external CD Player in the center console: If you are using the BCI-CH41 to add Rear Media Mode, this CD player will need to be disconnected as the BCI Rear Media mode will take over this input. 

Compatible Vehicles:

• 2015-2017 CHRYSLER 200
• 2015-2019 CHRYSLER 300
• 2015-2019 DODGE CHALLENGER
• 2015-2019 DODGE CHARGER
• 2014-2019 DODGE DURANGO
• 2013-2019 DODGE RAM TRUCK
• 2014-2018 JEEP CHEROKEE
• 2014-2019 JEEP GRAND CHEROKEE
• 2013-2019 RAM Truck