Descriptions

About: PRV Audio RS65-PRO 6.5" 100W RMS Full-Range Speakers - 4 Ohm (Pair)

Meet our premium 6.5” car audio OEM Replacement RS65-PRO. Engineered to deliver high performance, these speakers are an excellent choice for audiophiles looking to replace their speakers in any car sound system with (2-Way Setup) speakers and tweeters. Its most common application is to replace speakers in a system with a factory amplifier, which makes it a breeze to upgrade the sound system with only one speaker. This fullrange speaker works great with a factory tuned amp with a set HPF and LPF. They will be a huge improvement compared to the low sensitivity stock speakers. 

RS65-PRO is designed for easy installation with a standard 6.5″ frame size that fits many OEM door speaker locations. Although this speaker was designed to be powered by an amplifier, it can also be used in a factory or aftermarket radio for good sound quality and better clarity over OEM speakers. The RS65-PRO will immerse you in the music no matter where you are in your vehicle by replacing your current speaker! Upgrade today and hear the difference! 

This speaker is an excellent upgrade for listeners wanting to go beyond the standard factory component set. With frequency responses ranging from 60Hz – 18,000Hz it delivers sound across a wide frequency spectrum, so you can completely transform your system with just a speaker upgrade, combined with your stock tweeter. What truly sets this unique speaker apart is its shallow mounting depth of only 2.44 inches with a small profile, which makes it ideal for tight spaces where full-sized speakers just won’t fit. As the RS65-PRO has a sensitivity of 94 dB, it is extremely efficient at converting low power into sound, despite its slim design.

Features:  

• Its high sensitivity and wide frequency response make these the best OEM replacement speakers, powered by your stock or aftermarket radio.
• Small Profile – Designed for easier installation with its standard frame size that fits many OEM door speaker locations. 4 Ohm Impedance.
• Fullrange Speaker – Designed to reproduce a wide frequency range from 60Hz – 18,000Hz, it can play low midbass punch and high notes, delivering rich, detailed sound.
• These 6.5″ full range speakers utilize a high quality ultra lightweight cone, providing more accurate audio at 94dB sensitivity, superior to most stock car audio speakers.

Specifications:

• Nominal Diameter: 6.5″ (152 mm)
• Nominal impedance: 4 Ohm
• Continuous Program Power (RMS): 100 Watts
• Max Peak Power: 200 Watts
• Sensitivity 2.00V at 1m: 94 dB
• Frequency Response: 60 – 18,000 Hz
• Voice Coil Diameter: 1.0″ (25.4 mm)
• Voice Coil Wire: CCAW
• Voice Coil Winding Depth: 9.20 mm
• Former Material: Kapton
• Magnetic Gap Depth: 5.0 mm
• Frame Material: Stamped Steel

Thiele-Small Parameters: 

• Equivalent Volume (Vas): 5.77 l
• Excursion (mathematical) (Xmax): 3.35 mm
• Free Air Resonance (Fs): 131.6 Hz
• Mechanical Factor (Qms): 10.15
• Electrical Factor (Qes): 1.18
• Total Factor (Qts): 1.06
• Cone Area (Sd): 154 cm²
• Mechanical Mass (Mms): 8.37 g
• Bl Factor (Bl): 4.46 Tm
• Dc Resistance (Re): 3.4 Ohm
• Inductance (Le): 0.16 mH at 1 kHz
• Mechanical Mass Without Air (Mmd): 7.29 g
• Mechanical Compliance (Cms): 0.175 mm/N 

Mounting and Shipping Information:  

• Overall Diameter: 6.57” (167 mm)
• Front Mount Baffle Cutout: 5.75″ (146 mm)
• Mounting Depth: 2.44” (62 mm)
• Overall Depth: 2.76” (70 mm)
• Net Weight: 2.70 Lbs (1.25 kg)
• Shipping Weight: 6.95 Lbs (3.15 kg)
• Carton Dimensions (W x L x H): 16.53″ x 8.46″ x 4.33” (420 x 215 x 110 mm)

Note:   

• Nominal power handling is defined as the maximum RMS power that the speaker can handle in a 2-hour test with a pink noise with 6dB of crest factor and a bandpass filter with 12db/oct tuned in its usable frequency range.
• Continuous Program Power (RMS) is the maximum power that the speaker can handle considering a regular musical program using our recommended filters, this power can be used to define the optimum amplifier power to avoid a clean signal without clipping or saturation.
• Max Peak Power is the maximum power operation for the speaker, this power is allowed just for a few fractions of a second, usually found just on the peaks of the music. Keeping this power for a little longer timer will damage the speaker.