Descriptions

About: PRV Audio TW150SD-4 32mm Silk Dome Tweeter (Pair)

The New TW150SD-4 is here to change the silk dome tweeter market (also referred to as a soft dome) with a new design, featuring a large 32mm dome with a 1.1” voice coil able to handle 120 Watts, and offering remarkable clarity and exceptional response above 2Khz.

With an overall diameter of 2.37”, and requiring a cutout mounting hole of 1.93”, these 4 Ohm tweeters are a great drop-in upgrade to vehicles with standard 2” factory tweeters, or can even transform your sound system with very little modification, using an easy flush-mount screw-on ring.

These tweeters are the preferred choice for high-end car audio and motorcycle systems, made to be easily mountable anywhere, with its shallow profile, allowing installation in tight spaces. Featuring high-strength neodymium magnets acting as a powerhouse, ensuring high efficiency while still keeping size small.

Furthermore, these neodymium tweeters are designed to keep up with high efficiency loudspeakers, having a premium high sound output that easily integrate with your system. The built-in inline capacitor smooths down low frequencies helping deliver clean high frequencies with amazing detail.

Product Highlights: 

• 32 mm dome with 1.1″ voice coil – 4 Ohm
• High-Strength neodymium magnet within compact machined housing
• Non-fatigue cloth diaphragm, for extended frequency response
• Ultra-high sensitivity of 94dB to deliver high output.

Specifications:

• Nominal Impedance: 4 Ohms
• Power Handling: 
• Nominal Power Handling: 60 Watts 
• Continuous Program Power (RMS): 120 Watts 
• Max Peak Power: 240 Watts
• Sensitivity 2.00V at 1m: 94 dB
• Recommended Hi Pass Crossover: 3500 Hz**12dB Per Octave Crossover
• Frequency Response at -10db: 2000 - 20,000 Hz
• Voice Coil Diameter: 1.1" (28 mm)
• Voice Coil Wire: CCAW
• Voice Coil Former Material: Kapton
• Diaphragm Material: Silk
• Magnet Material: Neodymium

Mounting and Shipping Information: 

• Overall Depth: 1.03″ (26.2 mm)
• Mounting Depth: 0.67″ (17 mm)
• Overall Diameter: 2.37″ (60.2 mm)
• Baffle Cutout Diameter: 1.93″ (50 mm)
• Shipping Weight (pair): 0.73 lbs (0.33 kg)
• Carton Dimensions (W x L x H): 2.83″ x 6.18″ x 1.65″ (72 x 157 x 42 mm)

Note:  

• Nominal power handling is defined as the maximum RMS power that the speaker can handle in a 2-hour test with a pink noise with 6dB of crest factor and a bandpass filter with 12db/oct tuned in its usable frequency range.
• Continuous Program Power (RMS) is the maximum power that the speaker can handle considering a regular musical program using our recommended filters, this power can be used to define the optimum amplifier power to avoid a clean signal without clipping or saturation.
• Max Peak Power is the maximum power operation for the speaker, this power is allowed just for a few fractions of a second, usually found just on the peaks of the music. Keeping this power for a little longer timer will damage the speaker.