Descriptions

About: Sony URX-P40/14 UWP-D Series Wireless Audio Receiver

The URX-P40 offers digital signal processing for pristine audio and analog UHF transmission with true-diversity reception for reliability, even under difficult shooting conditions. This low-profile camera-mount receiver is designed for enhanced mobility with compact camcorders and smaller DSLR/mirrorless cameras.

Sony shooters can take advantage of the SMAD-P5 digital MI Shoe adapter (available separately), which provides a direct, clean digital audio connection to select cameras equipped with a digital Multi Interface Shoe.

The URX-P40 is backward-compatible with Sony WL-800 and UWP Series systems.

Reliable Reception with True Diversity

To achieve stable audio, the UWP-D receiver employs true-diversity technology with two antennas and two independent receiver sections within the unit. Both RF signals are compared and the stronger signal is automatically selected for output—reducing dropouts to a minimum.
The angle of the two antennas can also be adjusted, which helps to further prevent signal dropouts.

The system offers a 72 MHz bandwidth with 2772 UHF frequencies.

Professional Features to Speed Up Your Workflow

NFC Automatic Channel-Setting Mode

Press and hold the NFC/Sync button, and the receiver scans for the cleanest RF channel. Simply hold the transmitter next to the receiver; it automatically syncs up and you’re good to go!
Unlike purely digital systems, the URX-P40 allows you to send a single mic to multiple cameras for broadcast applications. Fast NFC communication makes setup for multiple receivers a breeze.

High-Visibility OLED Display for Indoor/Outdoor Use

Both transmitter and receiver feature an easy-to-read OLED display. The quick response of the display lets you see the operating conditions clearly and accurately in real time, even in bright sunlight.

Channel Memory Function

The channel memory function lets you quickly switch between the groom’s lav mic and the wedding guest’s interview mic with the press of a button. It also allows for a fast change between mics in corporate presentations or quickly swapping to a back-up mic.

High-Quality Sound with Digital Audio Processing

Unlike traditional analog wireless systems, the UWP-D supplements its proven analog UHF transmission technology with a proprietary digital audio processing. Transient sounds and consonants are reproduced with greater accuracy, resulting in clear, natural sound that’s intelligible and nuanced.

A Compact Build, Ready for the Camera

The URX-P40 features a robust, all-metal construction well suited for tough operating conditions.
Using the included shoemount adapter, the receiver easily mounts on your camera, while adding minimal weight to your rig. Cables are included to connect to cameras equipped with either a 3.5mm or an XLR audio input.

Direct Digital Audio via SMAD-P5 MI Shoe Adapter

The SMAD-P5 digital MI Shoe adapter allows you to integrate the receiver with XDCAM camcorders and select Sony cameras equipped with a digital Multi Interface Shoe.

• This setup provides a direct digital connection, skipping the receiver’s D/A and camera’s A/D converters for superior audio quality and low noise.
• Audio information such as RF level meter, audio-mute status, and low-battery alert for the transmitters is displayed on the camera's viewfinder.
• This cable-free configuration allows for fast setup in the field.
• Compatible models include the a7R IV mirrorless camera, the PXW-Z280 and PXW-Z190 XDCAM camcorders, and more.

Compatibility with Other Sony Wireless Systems

The URX-P40 can be used with a UWP Series or WL-800 Series transmitter.

Multiple Powering Options

Two AA batteries (alkaline or NiMH rechargeable type) power the receiver for up to 6 hours.
A battery count-up timer allows for accurate reading of battery running time to minute accuracy.

The receiver can also be powered through its USB port, allowing it to run for numerous hours on a USB power pack or indefinitely, if you have access to AC.

With the SMAD-P5 Digital MI Shoe adapter, the receiver can get power directly from Sony cameras equipped with an MI Shoe.

Cartridge-type battery case allows for quick battery replacement on set.

Headphone Monitoring for Location Sound

If your camera doesn’t have a headphone jack, Phone mode lets you monitor your sound via the receiver’s headphone output while recording.
When the receiver is used as a personal monitoring device by a director or crew on set, Monitor mode lets you adjust the headphone volume on the fly with the +/- buttons.

Specifications:

• Wireless Technology: Analog UHF
• Diversity: Yes, True Diversity
• Max Operating Range: 330' / 100.6 m (Typical)
• Receiver Type: 1x Camera-Mount
• Number of Audio Channels: 1
• Included Transmitters: No Transmitters Included
• Microphone Type: No Microphone Included
• Included Charging Case: No
• RF Frequency Band: 470 to 542 MHz
• Number of RF Channel Frequencies: 2772
• Max Operating Range: 330' / 100.6 m (Typical)
• Max Transmitters per Band: 16
• Latency: 0.35 ms
• Encryption: No
• Built-In Recorder: No
• Timecode Support: No
• Mobile App Compatible: No
• Receiver Type: 1x Camera-Mount
• Mounting Options: Shoe-Mount (with Included Hardware)
• Antenna: 2x Fixed 1/4 Wave External (Top-Mount)
• Number of Audio Channels: 1
• Audio I/O
• 1x 1/8" / 3.5 mm Locking TRS Unbalanced Output
• 1x 1/8" / 3.5 mm TRS Headphone Output
• Network I/O: No
• USB/Lightning Connectivity: 1x USB-C Female (Bus Power)
• Gain Range: -12 to +12 dB (3 dB Steps)
• Frequency Response: 23 Hz to 18 kHz
• Display: OLED
• Power Requirements: Battery, Bus Power (USB)
• Receiver Battery Type: 2x AA (Not Included)
• Receiver Battery Life: 6 Hours (Alkaline)
• Included Charging Case: No
• Environmental Resistance: No
• Housing: Metal
• Dimensions: 2.8 x 2.5 x 1.2" / 70 x 63 x 31 mm (without Antennas)
• Weight: 4.6 oz / 130 g (without Batteries)