Descriptions

About: Rockford Fosgate X317-STG3 Stage 3 Audio System for Select 2017+ Can-Am X3 Models

The easiest SXS kits to install and set up, optional Color Optix™ lighting control, and even higher performance, all to ensure an epic off-road audio experience.

Our Gen-3 Stage 3 is boosted with bass so you can experience full spectrum audio when running the trails. System allows you to add front Color Optix™ speakers and subwoofer on select Maverick X3 models. Kit is equipped with a PMX-2 digital media receiver, upper dash kit, front speaker panels, M1 6.5” Color Optix™ speakers, 800-watt Element Ready™ amplifier, under-seat front subwoofer enclosure, M1 10” Element Ready™ subwoofer, 8-gauge wiring harness, and Color Optix™ controller. Kit supplied with all necessary mounting and installation hardware requiring minimal time and tools. 

Plug-and-Play Design: 

No drilling, no cutting and designed to work right out of the box. Simple installation ensures less time in the garage and more time out riding.

Element Ready™: 

Purpose built for the off-road environment, Rockford’s Element ReadyTM products are built to stand up to water, dirt, mud and UV rays, making sure all your audio components perform regardless of the conditions.

RF3 (Rockford Factory Fit & Finish): 

Designed and engineered to match and compliment the factory fit and finish of your vehicle. These components are purpose built to the exact specifications to ensure the best in class fitment and look.

Connectivity Control: 

With Bluetooth connectivity, AUX and USB inputs, it’s easy to control your music or even charge your phone, no matter where the trail takes you.

Features: 

• Direct connect wiring harnesses for Can-Am X3 models
• PMX-2: Compact AM/FM/WB Digital Media Receiver 2.7" Display
• Enclosures for speakers/subwoofer integrate with no loss of passenger space
• Color Optix™ enabled
• Complete Element Ready™ audio system
• Easy setup of audio system: amplifier preset for maximum performance without tuning
• X317-DK: Dash Kit for PMX-1, PMX-2 or PMX-3 on Select Can-Am® Maverick X3 Models
• X317-FSE: 6.5" Front Color Optix™ Speaker Panels with Smart-Lok for Select Can-Am® Maverick X3 Models
• X317-M1FWE: M1 10" Element Ready™ Loaded Enclosure for Select Can-Am® Maverick X3 Models (no RGB)
• X317-K8: 8 AWG Amp Installation Kit for Select Can-Am® Maverick X3 Models
• M1-65B: M1 6.5” Color Optix™ Marine 2-Way Speakers - Black
• M5-800X4: 800-watt 4-channel IPX6 Element Ready™ amplifier
• PMX-RGB: Color Optix™ speaker color controllable via RF Connect mobile app
• Includes wired antenna

Specifications: 

• Sound system includes a digital media receiver, 6-1/2" speakers, a 4-channel amp, and a 10" subwoofer
• also includes front and rear speaker pods, sub enclosure, wiring, amp kit and mounting plate

Rockford Fosgate PMX-2: 

• Marine digital media receiver with AM/FM/WB tuner (does not play CDs)
• Built-in amplifier (25 watts RMS/50 peak x 4 channels)
• Works with Apple and Android smartphones
• USB port and aux input
• Built-in Bluetooth for music streaming (will not make calls)

Rockford Fosgate M1-65B 6-1/2" 2-Way Front Speakers:

• Color Optix-compatible
• Marine-rated speakers pre-loaded in custom-fit enclosures
• Power handling up to 75 watts RMS (150 watts peak)
• Salt-, fog-, and UV-resistant Santoprene rubber surround
• Integrated 1" dome tweeter

Rockford Fosgate M1D2-10B 10" Marine Subwoofer w/ Enclosure: 

• Power handling: 300 watts RMS (1200 watts peak)
• Rugged, UV-stable injection-molded plastic construction
• Dual 2-ohm voice coils
• Durable Santoprene rubber surround

Rockford Fosgate M5-800X4 4-Channel Amp: 

• 100 watts RMS x 4 at 2 or 4 ohms (400 watts peak)
• 200 watts RMS x 2 at 4 ohms in bridged mode
• Variable low- and high-pass filters (50-250 Hz at 12 dB/octave)
• Front and rear tone controls (45 Hz, 12,500 Hz)

What’s in the Box: 

PMX-2 Digital Media Receiver:

• Marine digital media receiver
• Trim-ring
• Mounting plate
• Mounting bracket
• Wiring harness
• Backstrap
• 4 Machine screws
• 4 Hex-nuts
• Installation/Operation booklet

M1-65B 6.5" Speakers:

• Two 2-way marine speakers
• Two 11" LED power harnesses with 4-pin Deutsch connectors on one end
• Twelve 1-1/4" Stainless steel Allen head screws
• Two 3mm Allen head bits
• 3.5mm Drill bit
• Instruction manual (English/ French/ Spanish/ German/ Italian)
• Rockford Fosgate contact information

M5-800X4 Amplifier:

• 4-Channel powersports amplifier
• 11" Power/ground/turn-on & speaker output harness (installed on amp)
• 11" Input harness (installed on amp)
• Two 14" RCA-to-Molex input adapters
• Power/ground/turn-on adapter plug
• Two 7.5" speaker output harnesses
• 3mm Allen key
• Owner's manual
• Performance certificate
• Contact information

X317-M1FWE 10" Subwoofer:

• Custom enclosure loaded with one M1D2-10B 10" subwoofer
• 2 Mounting brackets
• 9.5' 2-Wire harness
• Fourteen 8" wire ties
• Four 6.5" wire ties w/push-fasteners
• Six 12mm hex-socket screws
• Contact information

PMX-RGB Light Controller:

• PMX-RGB LED Controller w/ attached 17" LED cables and 17" power/ground harness (inline 2A ATC fuse)
• 6" Power/ground harness adapter
• Two 3/4" machine-screws
• 2 Nuts
• 2 Lock-washers
• Installation manual

X317-DK Dash Kit:

• Radio housing
• Trim ring
• Rear support plate
• 35" Speaker harness
• 6' Wire antenna (Motorola plug on one end / bare-ended wire on other end)
• Two 24mm screws
• Eight 1/2" screws
• Twelve 8" wire-ties
• Contact information card

X317-FSE Speaker Enclosures:

• 2 Unloaded speaker enclosures
• 35" Left front speaker harness
• 52" Right front speaker harness
• Five 8" wire ties
• One 30mm bolt
• 1 Flat washer
• 1 Nut
• 2 Warning decals
• Contact information

RFX3-K8 Amplifier Wiring Kit:

• 11' 8 AWG Wiring harness (inline 60A maxi-fuse) w/attached 4' RCA/speaker harness
• Mounting plate
• 2 Brackets
• Fourteen 8" Wire ties
• Four 6.5" wire ties w/push-fasteners
• Four 10mm screws
• 2 Hex nuts
• 1 Flange nut
• Installation instructions