About: Cicada Audio 14CXCX-2X2 Audio kit with 2-channel Amp, 2 Speakers with Grilles and Wiring for Select Harley Davidson Street Glide and Road Glide Motorcycles
You're in command when you hit the road with your Harley. Boost your sound system with Cicada Audio's CXCX-2X2 audio kit and you'll enjoy the ride even more. This powerful combo combines their CX250.2D amp, a pair of CX65.4 speakers, grilles, and all the wiring you need to roll with your favorite tunes. Cicada Audio's commitment to high-quality design and construction means you'll enjoy your investment for years to come.
Two channels of road-worthy power
This package's CX250.2D 2-channel amplifier is small enough to mount easily on your bike, but powerful enough to drive your speakers with punch and clarity. The package includes an amp wiring kit, so you'll have the right gear for a safe installation. And thanks to the included Harley-specific connectors, you can plug it right into the existing stock radio — no splicing required.
Fairing speakers to cut through wind and engine noise
Durability and weather resistance are important when swapping out the speakers on your bike. The CX65.4 coaxial speakers are constructed with waterproof IMPP cones for moisture resistance. They'll also handle the heat that can build up from high-volume use, thanks to a high-temp voice coil and heavy-duty polymer frame. Sound quality? No problem. The PEI dome tweeters radiate plenty of highs to ensure clarity and an ample stereo sweet spot. The package includes Cicada Audio-branded grilles for both Street Glide and Road Glide models for that final touch.
Features:
- system includes two 6-1/2" fairing speakers, a 2-channel amplifier, Road Glide and Street Glide Cicada logo grilles, and power, speaker, and input wiring
- designed for Harley-Davidson® Road Glide and Street Glide motorcycles
Cicada Audio 65.4 6-/2" full-range speakers
- designed for your Harley's fairing speaker locations
- Road Glide and Street Glide grilles included
- waterproof IMPP Cone with NBR surrounds
- 1" PEI dome tweeters
- power handling: 100 watts RMS (200 watts peak)
- frequency response: 54-20,000Hz
- sensitivity: 94 dB
- impedance: 4 ohms
- mounting depth: 2.26"
- mounting diameter: 5.32"
Cicada Audio CX250.2D 2-channel amplifier
- speaker-level input for OEM or aftermarket receiver
- Class D amp technology
- 150 watts RMS x 2 (4 ohms)
- recommended fuse: 40 amps
- 8- gauge amplifier wiring kit included
What's in the box:
- CX250.2D Amplifier:
- 2-Channel amplifier
- Power/ground terminal block
- 9" RCA input harness
- 8" Speaker output harness
- Four 3" strips of hook-and-loop fastener
- Two 8 ga. ferrules (red & black)
- 2mm Allen key
- 3mm Allen key
- Four 5/8" screws
- Specifications & Cicada contact information
- CX65.2 Speakers:
- Two 2-way speakers
- 2 Grilles
- Eight 1-3/8" Stainless steel screws
- Feature/Spec sheet
- HDPG8K Amp Wiring Kit:
- 6.5' Loomed 8-gauge power & ground wires (inline fuse holder with two 20A ATO fuses installed)
- 27" Remote turn-on wire with intermediate connector
- 3mm hex-key (attached to fuse holder)
- 14HDAR-RG Amp Bracket:
- Amplifier mounting bracket
- Two M5x14mm screws
- Four M4x10mm screws
- Two M3x8mm screws
- Two M5 nuts
- Four M4 nuts
- Two M3 nuts
- Sixteen 8" wire ties
- 14HDAR-SG Amp Bracket:
- Amplifier mounting bracket
- 9"x7" Sheet of Velcro
- Sixteen 8" wire ties
- CHDRGG Grilles:
- 2 Street Glide speaker grilles with Cicada logo
- CHDSGG Grilles:
- 2 Road Glide speaker grilles with Cicada logo
- HDFOM Speaker Harness:
- 16" Speaker harness with a 4-pin Molex plug on one end and dual 2-pin harnesses on the other end
- HDFIM Speaker Harness:
- 18" Speaker harness with a 4-pin Molex plug on one end and dual 2-pin harnesses on the other end (in-line 47-ohm resistors on both lines)