About: DS18 LSE-110A Single 10" Bass Package 200 Watts RMS with Amplifier and 4g Amp Kit

If you are looking for a lot of thumping bass and a very clean prefab box, we here at DS18 have developed a very strong package to fit one of our bestselling speakers that we have to offer in a complete box! Now you don have to worry about building a box by yourself to spec for your new subwoofer purchase because you can buy them together with 1 easy click of the mouse.

This beautiful ported box is tuned to 42Hz. The ½ inch thick treated MDF ensures the box will be tough enough to withstand very strong vibrations along with giving very accurate acoustical resonances for the perfect bass response. Inside the box is one of our best-selling subs, the MD10.4 subwoofer. This sub has a 32 oz ferrite magnet and can take up to 200 watts RMS each and 800w maximum power! With a 4 ohms configuration on the 2 inch 4-layer voice coil, you will have no problem making power out of your amplifier because the final load will be optimal and with a sensitivity of 90dB. With this you wont miss out on any of the wide range of frequencies this sub and box combo can produce!

Included in this kit is the amplifier to drive it! The included S-1500.1 class AB amp will provide you 350w RMS to perfectly power this package. To install everything you also receive a DS18 AMPKIT4 installation 4 gauge kit.

Product Highlights: 

• Best selling MD10.4 sub giving you amazing low bass and great wattage handling.
• High Quality prefabricated DS18 subwoofer box that not only looks great but brings out low and loud bass easily.
• Ported design tuned to 42hz.
• Included DS18 Class AB amplifier delivering 350w RMS to give you the perfect to subwoofer matchup.
• Included 4 gauge amplifier kit so you can have all the tools to power up your new DS18 Subwoofer package.

Features: 

• Speaker Size: Single 10”
• Total Impedance: 4 Ohms
• Power Handling: 
• RMS Power: 200 watts
• MAX Power: 400 watts
• Sensitivity (1w/1m): 90 dB
• Frequency Response: 35 - 250Hz
• Recommended Lo Pass Crossover: 90Hz

Subwoofer Specifications: 

• Voice Coil Diameter: 50.8mm (2”)
• Voice Coil Former Material: Aluminum
• Winding Material: SV
• Cone Material: PPI
• Surround Material: Rubber
• Surround Material: Steel
• Magnet Material: Ferrite
• Magnet Weight: 32 oz

Box Specifications: 

• Port Tune:42Hz
• Internal Volume: 34L
• Load Configuration: Front Ported
• Box Material: 1/2" MDF
• Finish Material: Carpet

Measurements:

• Height: 13.78” (350 mm)
• Width: 15.75” (400 mm)
• Depth:  111” (280 mm)
• Depth:  214” (356 mm)