About: DS18 LSE-112A Single 12" Bass Package 250 Watts RMS with Amplifier and 4g Amp Kit
Designed exclusively to bring breathtaking bass to car audio enthusiasts like you, DS18’s LSE-112A is the key to unlocking bass you can feel! DS18’s LSE-112A Bass Package is the epitome of convenience, delivering mind-blowing bass in a single, all-inclusive package.The prefabricated box features a solid construction of 1/2 -inch MDF, ensuring optimal strength and resonance. Tuned to perfection at 35Hz, this enclosure is designed to improve your subwoofers low frequency response. Durability is at the forefront of our design philosophy. We've engineered the LSE-112A to withstand the test of time, ensuring that you'll enjoy hard-hitting bass for years to come. With a rugged construction and high-quality materials, this bass package is built to endure the demands of your music, even under the most intense conditions.
At the heart of the LSE-112A Bass Package is the renowned MD12.4 subwoofer. With an impressive 250W RMS Power Handling and single 4-ohm impedance voice coil, this subwoofer packs a punch well above its weight class. The MD12.4’s unparalleled cone area helps it generate deep, rich bass that will resonate through your entire vehicle. With a sensitivity of 93dB, the MD12.4 effortlessly reproduces frequencies from 29Hz to 250Hz, for bass response that will blow you away.
Complementing the subwoofer is the S-1500.1/RD amplifier, a true Monoblock powerhouse that pushes your audio system to the next level. With 350W of RMS power output at 2 ohms and 220W at 4 ohms, this Class AB amplifier delivers clean, distortion-free sound that will satisfy even the most discerning audiophiles. The carefully calibrated gain and crossover ranges provide precise control over your bass, allowing you to fine-tune every detail of your audio experience. But that's not all. To complete this exceptional package, we've included a 4-GA Amp Kit that ensures a hassle-free installation. From the AGU Fuse Holder to the Red/Black Twisted RCA Cable, every component has been handpicked for maximum performance and durability. We've left no stone unturned to deliver an all-encompassing solution that meets and exceeds your expectations.
Product Highlights:
- Subwoofer Enclosure Package
- 1 X 12" ~ SLC-MD12.4 ~ 90dB
- 1 X 1 Channel Subwoofer Amplifier
- 1 X 4 GA Amp Kit
- RMS Power: 250 Watts(500 Watts Peak)
- 35Hz Ported ~ 1/2" MDF with Black Carpet
Subwoofer Specifications:
- Model Number: SLC-MD12
- Nominal Diameter: 12"
- Nominal Impedance: 4 Ohm
- RMS Power Handling: 250W
- MAX Power Handling: 500W
- Sensitivity (1w/1m): 90dB
- Frequency Response: 29-250Hz
- Recommended HI Pass Crossover: 80Hz
- Magnet Weight: 42 oz
- Magnet Material: Ferrite
Ported Box Specifications:
- Model Number: LSE-112A
- Port Tune: 35Hz
- Internal Volume: 45.3L
- Load Configuration: Front Porte
- Box Material: 1/2" MDF
- Finish Material: Carpet
- Measurement (L x W x H): 19" x 14" x 14"
Amplifier Specifications:
- Model Number: S1500.1/RD
- Circuit Topology: Class AB Monoblock Amplifier
- RMS Power Output @ 2 Ohm: 350 Watts
- RMS Power Output @ 4 Ohm: 220W
- Total Harmonic Distortion: <.3%
- S/N Ratio Ref 1w @ 4 Ohm: >90 db
- Gain Range: 0.2-6V
- Crossover Range: 50-250hz
- Frequency Range: 20Hz-500 Hz
- Measurement (L x W x H): 13.7" x 5.8" x 1.8:
Measurements:
- Height: 13.78” (350 mm)
- Width: 19.68” (500 mm)
- Depth 1: 11” (280 mm)
- Depth 2: 14” (356 mm)
What's in the Box:
- 1 x DS18 S-1500.1 Amplifier
- 1 x DS18 SLC-MD12 in a ported box
- 1 x 4-GA AMP KIT - 500 WATTS
- 1 x AGU Fuse Holder With AGU-100A
- 1 x 6ft. 4GA Loom Tube
- 1 x Rubber Grommet
- 1 x 17ft. Red Power Cable: 21mm² OD: 10mm
- 1 x 3ft. Black Ground Cable: 21mm² OD: 10mm
- 1 x 17ft. Red/Black Twisted RCA Cable
- 1 X 17ft. Turn-On Cable: 20*0.15mm
- 1 X 17ft. Red/Black Speaker Cable: 1.31mm² x 2 wires OD 3.2 x 6.4mm