About: Focal FPX 5.1200 Performance Series 5-Channel Car Amplifier

5-channel FPX 5.1200 amplifier has a maximum power of 4 x 120 Watt + 1 x 720 Watt at 2 Ohms!

The input selector (2/4/6 channels) duplicates channels, meaning there will always be 5 output channels, even if the head unit only has one or two stereo outputs.

To perfectly tune the subwoofer to the rest of the installation, the bass channel has a low-pass active crossover, a bass equaliser, phase adjustment and a subsonic filter (particularly useful for cutting off frequencies which are too low for a small subwoofer). The remote control enables you to adjust the bass level from the driving seat depending on the type of music you’re listening to.

Stable at 4 and 2 Ohms, this new FPX amplifier will drive most speaker drivers on the market with just the right amount of power: 4 x 75 Watts + 1 x 420 Watts RMS at 4 Ohms (CEA standard). With its power and contained volume, FPX 5.1200 makes the installation easier in order to make the most of your boot space.

Advantages:

• D Class amplifier: 5 output channels
• 2 Ohm Stable
• High power and dynamic reserve (1 200W max)
• Audio Mos-Fets – Optimized efficiency
• Subwoofer remote control supplied

Specifications:

• CEA Power (4 Ohms) 4×75 Wrms + 1×420 Wrms
• Maximum Power (2 Ohms) 4x120Wrms + 1×720 Wrms
• Maximum Power (Ch 1-4 bridged at 4 Ohms + Ch 5 at 2 Ohms) 2x240Wrms + 720 Wrms
• Bandwidth 10Hz–20kHz
• Total Harmonic Distortion 0.03%
• SNR (1W/A) 75 dBA
• Low-Pass Filter Ch 1-4 50Hz-500Hz
• Ch 5 (Subwoofer): Subsonic Filter (High-pass) 10Hz-50Hz+
• Ch 5 (Subwoofer): Low-pass filter 50Hz-250Hz
• Ch 5 Bass Boost 45Hz / 0 to 12dB
• Phase adjustable from 0 to 180° For channel 5
• Copy Mode: (6 CH / 4 CH / 2 CH)
• Full Range Mode:
• Protections Short Circuit, low impedance, reversal of polarity, DC, power drop, heat protection
• Weight 9lbs (4.1kg)
• Dimensions(HxLxD)
• 13-17/64″ x 2-1/4″ x 6-57/64″ (337 x 175 x 57mm)

What's in the box: