About: Kenwood Excelon XM302- 4-Channel Powersports/Marine Amplifier 50 Watts RMS x 4
Need power, but lack space in your boat or off-road vehicle? Kenwood's Excelon XM302-4 four channel powersports/marine amplifier delivers 50 watts RMA per channel, yet still fits almost anywhere in your vehicle. Switch this amp over to bridged, 2-Channel mode, and you can power a pair of high performance speakers or subs with 150 watts RMS each. In 3-channel mode, you can use the amp's front channels to drive a pair of speakers with 50 watts each, and bridge the rear channels to send 150 watts to a sub. This versatility pays off as your systems evolves over time.
Fine-Tuning Included
High-and-low-pass filters let you optimize the sound for your vehicle and speakers. When you're sunning a subwoofer with the rear channels, you can adjust a bass boost to get just the right tone to fit your musical tastes.
Convenient Weather-Proof Technology
Conformal coating protects the internal circuits from water and dirt, so the show will always go on, even through the roughest conditions on road, trail, or waterway. Class D technology ensures that this compact amp will run cool and preform reliably. The amp accepts input signals from a receiver's RCA outputs or speaker wiring, so it'll work with almost any audio system. If you do use the speaker-level inputs, the amp can sense the signal and turn itself on, so you won't need to run a separate remote turn-on lead to the receiver or fuse box.
Product highlights:
- 4-channel powersports/marine amplifierClass D amp technology
- 50 watts RMS x 4 at 4 ohms
- 75 watts RMS x 4 at 2 ohms
- 150 watts RMS x 2 bridged at 4 ohms
- variable high- and low-pass filters (50-200 Hz, 12 dB/octave)
- variable bass boost on B channels (0-18 dB at 40 Hz)
More info:
- conformal-coated circuit boards — suitable for powersports and marine applications
- preamp and speaker-level inputs
- wiring and hardware not included with amplifier
- 8-gauge power and ground leads recommended
- fuse rating: 20A x 2
What's in the box:
Kenwood Excelon XM302-4 owner's manual
- 4-Channel amplifier
- Two 20-amp ATC fuses (installed)
- Terminal cover (installed)
- Control panel cover (installed)
- 4 RCA input covers (installed)
- Speaker level input port cover (installed)
- 7" Speaker level input harness
- Four 5/8" Screws
- Instruction manual (English/ French/ Spanish)