Product Highlights:

The Skar Audio SKv2-200.4D is a competition grade multi-channel class D speaker amplifier that was designed to deliver unequivocal performance and power output. As a part of the flagship SKv2 series of amplifiers from Skar Audio, this model utilizes only the highest quality internal components and features advanced engineering enhancements that allow it to outperform anything else on the market in its power class. The size of this amplifier and the power and performance that it can deliver due to its class D circuitry design is absolutely mind blowing.

If you are looking for the absolute best amplifier to power your "daily driver" sound stage, look no further - this is the amplifier for you. Whether you are looking to power component speakers, pro audio speakers, or a mix of the both, this amplifier is more than capable of powering an entire vehicle's audio system. The SKv2-200.4D is conservatively rated at 800 watts RMS power (200 watts x 4 channels), and at max power output can produce more than an astonishing 1,600+ watts (400+ watts x 4 channels). In addition to its extreme performance capabilities, this amplifier features an advanced heatsink design that allows for maximum cooling, as well as 4-way protection circuitry, enabling the amplifier to operate efficiently at peak output levels for hours on end.

Furthermore, you'll have full reign over your amplifier with the built-in user control panel, featuring variable adjustment tunings for gain level, subsonic filter, high-pass filter with x1-x10 switch, low-pass filter with x1-x10 switch, and crossover switch to select which filters you'd like to use (HPF, Full, LPF). Versatility is key, and so in addition to all the above features - the SKv2-200.4D also has RCA outputs so that you can easily daisy chain multiple amplifiers together. This amplifier utilizes 4-gauge power and ground input terminals which allow for maximum current flow and therefore higher power output.

Specifications:

• Skar Audio SKv2-200.4D Class D 4-Channel Car Amplifier
• Competition Grade Quality and Performance
• 4 Way Protection Circuitry: Thermal, Voltage, Speaker, DC
• RMS Power at 2 Ohms: 320 Watts x 4 Channels (14.4v)
• Peak Power at 2 Ohms: 450 Watts x 4 Channels (14.4v)
• RMS Power at 4 Ohms: 200 Watts x 4 Channels (14.4v)
• Peak Power at 4 Ohms: 305 Watts x 4 Channels (14.4v)
• Frequency Response: 10Hz - 40kHz
• Signal-to-Noise Ratio: 85dB
• Damping Factor: 200<
• Low Level Input (Gain): 6V - 0.2mV
• RCA Line Output: Yes
• Subsonic Filter: 10Hz - 100Hz
• Crossover Selection: HPF / Full-Range / LPF
• LED Power & Protection Indicators: Yes
• Remote Bass Knob & Wire Included
• 4 Gauge Power and Ground Terminals
• Fuse Rating: 40 Amp x 2 External Fuses
• Dimensions: 11.8" (Length) x 9.15" (Width) x 2.5" (Height)

Channel 1/2 Crossover

• High Pass Filter (at 12dB Slope)
• x1, and x10 Multipliers
• Variable Crossover x1: 50Hz - 500Hz
• Variable Crossover x10: 500Hz - 5,000Hz

• Low Pass Filter (at 12dB Slope)
• x1, and x10 Multipliers
• Variable Crossover x1: 50Hz - 500Hz
• Variable Crossover x10: 500Hz - 5,000Hz

Channel 3/4 Crossover

• High Pass Filter (at 12dB Slope)
• x1, and x10 Multipliers
• Variable Crossover x1: 50Hz - 500Hz
• Variable Crossover x10: 500Hz - 5,000Hz

• Low Pass Filter (at 12dB Slope)
• x1, and x10 Multipliers
• Variable Crossover x1: 50Hz - 500Hz
• Variable Crossover x10: 500Hz - 5,000Hz

Real World Amplifier Dyno Testing Results

• Certified (RMS) Power at 2 Ohms: 325 Watts x 4 Channels (12.67v)
• Certified (RMS) Power at 4 Ohms: 237 Watts x 4 Channels (13.20v)
• Dynamic (Peak) Power at 2 Ohms: 467 Watts x 4 Channels (14.90v)
• Dynamic (Peak) Power at 4 Ohms: 305 Watts x 4 Channels (14.50v)